Chapter 5
Setup and Configuration
Parameter
auth-failure-trap-notify { auth-failure-trap-notify }
authen-traps-enabled
dscp { dscp }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.11.3
Viewing Statistics for SNMP
To view the statistics collected for SNMP, type:
show admin snmp statistics
If statistics are available, a table or list similar to the following example appears:
ruggedcom# show admin snmp statistics
statistics
unsupported sec levels 1
not in time windows
unknown user names
unknown engine ids
wrong digests
decryption errors
This table or list provides the following information:
Parameter
unsupported-sec-levels
not-in-time-windows
unknown-user-names
unknown-engine-ids
206
1
1
4
1
1
Description
Synopsis: { none, snmpv1_trap, snmpv2_trap, snmpv2_inform,
snmpv3_trap, snmpv3_inform }
Default: none
When the SNMP agent sends the standard authenticationFailure
notification, it is delivered to the management targets
defined for the snmpNotifyName in the snmpNotifyTable
in SNMP-NOTIFICATION-MIB (RFC3413). If
authenticationFailureNotifyName is the empty string (default), the
notification is delivered to all management targets.
Synopsis: true or false
Default: false
Enables authentication traps to be sent from the SNMP agent.
Synopsis: An integer between 0 and 63
Default: 0
Support for setting the Differentiated Services Code Point (6 bits)
for traffic originating from the SNMP agent.
Description
The total number of packets received by the SNMP engine which
were dropped because they requested a securityLevel that was
unknown to the SNMP engine or otherwise unavailable.
The total number of packets received by the SNMP engine which
were dropped because they appeared outside of the authoritative
SNMP engine's window.
The total number of packets received by the SNMP engine which
were dropped because they referenced a user that was not known
to the SNMP engine.
The total number of packets received by the SNMP engine which
were dropped because they referenced an snmpEngineID that was
not known to the SNMP engine.
RUGGEDCOM ROX II
CLI User Guide
Viewing Statistics for SNMP