Viewing Ppp Interface Statistics; Viewing The Hspa Network Status For Cellular Modems - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Parameter
admin-state
Section 3.22.3

Viewing PPP Interface Statistics

To view the statistics for the PPP interface, type:
show interfaces cellmodem ppp-connections
A table or list similar to the following example appears:
ruggedcom# show interfaces cellmodem ppp-connections
CONNECTION
IFNAME TYPE STATUS
---------------------------------------------------------------
cel-4-1 cdma Disconnected
This table or list provides the following information:
Parameter
connection-status
local-ip
remote-ip
tx-bytes
rx-bytes
mtu
Section 3.22.4

Viewing the HSPA Network Status for Cellular Modems

To view the status of the HSPA GSM network for a cellular modem, type:
show interfaces cellmodem slot/port profile profile
Where:
• slot/port is the slot name and port number for the cellular modem
• profile is the profile (e.g. hspa or hspaplus)
A list similar to the following example appears:
Viewing PPP Interface Statistics
LOCAL REMOTE TX
IP IP BYTES
0
Description
The wireless data communication technology that modem is
compatible with{ GSM/HSPA, CDMA/EVDO, LTE }.
Synopsis: { not set, up, down, testing, unknown, dormant,
notPresent, lowerLayerDown }
The port's administrative status.
RX
BYTES MTU
0 0
Description
Synopsis: A string 1 to 128 characters long
PPP connection status
Synopsis: A string 1 to 32 characters long
The IP address assigned to the modem by the remote server
Synopsis: A string 1 to 32 characters long
The IP address of the remote server
The bytes transmitted over the modem
The bytes received by the modem
MTU (Maximum Transmission Unit) value on the ppp interface
Chapter 3
Device Management
127