Viewing Switched Ethernet Port Statistics - Siemens RUGGEDCOM ROX II User Manual

Chapter 3
Device Management
Parameter
reauth-period { reauth-period }
reauth-max { reauth-max }
supp-timeout { supp-timeout }
server-timeout { server-timeout }
max-request { max-request }
5. If IEEE 802.1x standard authentication or IEEE 802.1x with MAC authentication is selected, configure a
primary and secondary RADIUS server. For more information, refer to
Authentication for Switched Ethernet
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
6.
Section 3.17.4

Viewing Switched Ethernet Port Statistics

To view statistics collected for a specific switched Ethernet port, type:
show interfaces switch slot port port-stats
Where:
• slot is the name of the module location
• port is the port number (or a list of ports, if aggregated in a port trunk) for the module
A table or list similar to the following example appears:
ruggedcom# show interfaces switch lm1 1 port-stats
port-stats
in octets 6820
out octets 3086
in pkts 33
out pkts 18
error pkts 0
This table or list provides the following information:
98
Description
Synopsis: An integer between 60 and 86400
Default: 3600
The time between successive reauthentications of the supplicant.
Synopsis: An integer between 1 and 10
Default: 2
The number of reauthentication attempts that are permitted
before the port becomes unauthorized.
Synopsis: An integer between 1 and 300
Default: 30
The time to wait for the supplicant's response to the
authentication server's EAP packet.
Synopsis: An integer between 1 and 300
Default: 30
The time to wait for the authentication server's response to the
supplicant's EAP packet.
Synopsis: An integer between 1 and 10
Default: 2
The maximum number of times to retransmit the authentication
server's EAP Request packet to the supplicant before the
authentication session times out.
Ports".
Section 4.8.3, "Configuring RADIUS
Viewing Switched Ethernet Port Statistics
RUGGEDCOM ROX II
CLI User Guide