Viewing A List Of Certificates; Viewing The Status Of A Certificate; Adding A Certificate - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Section 4.7.4.1

Viewing a List of Certificates

To view a list of certificates, type:
show running-config security crypto certificate
If certificates have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config security crypto certificate
security
crypto
certificate cert
contents
private-key-name key
ca-name
!
!
!
If no certificates have been configured, add certificates as needed. For more information, refer to
"Adding a Certificate".
Section 4.7.4.2

Viewing the Status of a Certificate

To view the status of a certificate, type:
show security crypto certificate certificate status
Where:
• certificate is the name of the certificate
This table or list provides the following information:
Parameter
issuer
subject
not-before
not-after
Section 4.7.4.3

Adding a Certificate

To add a certificate, do the following:
NOTE
Only admin users can read/write certificates and keys on the device.
Viewing a List of Certificates
"{--contents--}"
ca-cert
Description
Synopsis: A string
Synopsis: A string
Synopsis: A string
This certificate is not valid before this date.
Synopsis: A string
This certificate is not valid after this date.
Chapter 4
System Administration
Section 4.7.4.3,
173