Configuring A Shared Network Client - Siemens RUGGEDCOM ROX II User Manual

Chapter 5
Setup and Configuration
Parameter
authorize-server
option82
default { default }
maximum { maximum }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.15.6.4

Configuring a Shared Network Client

To configure the client for a shared network on the DHCP server, do the following:
1. Make sure the CLI is in Configuration mode.
2. Configure the following parameter(s) as required:
Parameter
hostname { hostname }
subnetmask { subnetmask }
default-route { default-route }
broadcast { broadcast }
domain { domain }
dns-server { dns-server }
static-route { static-route }
server { server }
242
Description
The action to take for previously unregistered clients.
Synopsis: typeless
Enables/disables the server's authorization on this client. If enabled, the server will send
deny messages to the client that is trying to renew the lease, which the server knows the
client shouldn't have.
Synopsis: typeless
Enables/disables the NAK of option 82 clients for this subnet.
Default: 600
The minimum leased time in seconds that the server offers to the client.
Default: 7200
The maximum leased time in seconds that the server offers to the clients.
Description
Synopsis: A string 1 to 32 characters long
The unique name to refer to the host within a DHCP configuration.
Synopsis: A string 7 to 15 characters long
Subnet mask
Synopsis: A string 7 to 15 characters long
The default route that the server offers to the client when it issues the lease to the client.
Synopsis: A string 7 to 15 characters long
The broadcast address that the server offers to the client when it issues the lease to the
client.
Synopsis: A string 1 to 256 characters long
The domain name that the server offers to the client when it issues the lease to the
client.
Synopsis: A string 7 to 31 characters long
The domain name server that the server offers to the client when it issues the lease to
the client.
Synopsis: A string 7 to 15 characters long
The static route that the DHCP server offers to the client when it issues the lease to the
client.
Synopsis: A string 7 to 15 characters long
The NIS server address that the DHCP server offers to the client when it issues the
lease to the client.
RUGGEDCOM ROX II
CLI User Guide
Configuring a Shared Network Client