Deleting A Key Chain; Deleting A Key - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Parameter
expire { expire }
5. Configure the send lifetime settings by configuring the following parameter(s):
Parameter
start { start }
expire { expire }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
6.
Section 5.20.9.5

Deleting a Key Chain

To delete a key chain for dynamic RIP routes, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the key chain by typing:
no routing rip key-chain name
Where:
• name is the name of the key chain
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.20.9.6

Deleting a Key

To delete a key from a key chain, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the key by typing:
no routing rip key-chain name key id
Where:
• name is the name of the key chain
Deleting a Key Chain
Description
Prerequisite: The start time cannot be configured unless the
expire time is configured.
Synopsis: { infinite } or a string
Expire time.
Prerequisite: The expire time cannot be configured unless the
start time is configured.
Description
Synopsis: A string
Sets the time period in which the key on the key chain is
considered valid.
Prerequisite: The start time cannot be configured unless the
expire time is configured.
Synopsis: { infinite } or a string
The time at which the key expires.
Prerequisite: The expire time cannot be configured unless the
start time is configured.
Chapter 5
Setup and Configuration
353