Table of Contents
Advertisement
Chapter 3
Device Management
Section 3.12.5
Managing Application Repositories
Before any RUGGEDCOM ROX II application can be installed or upgraded, a connection to its repository on the
upgrade server must be configured.
NOTE
Multiple applications can be installed or upgraded at the same time. Therefore, multiple repositories
may be configured.
The following sections describe how to configure and manage ROX application repositories:
•
Section 3.12.5.1, "Viewing a List of Repositories"
•
Section 3.12.5.2, "Checking the Repository Connection"
•
Section 3.12.5.3, "Adding a Repository"
•
Section 3.12.5.4, "Deleting a Repository"
Section 3.12.5.1
Viewing a List of Repositories
To view a list of RUGGEDCOM ROX II application repositories, type:
show running-config admin software-upgrade apps repository
If repositories have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config admin software-upgrade apps repository | tab
APP NAME
URL
-----------------------------------------------------------------
crossbow
http://10.200.20.231/crossbow-repo/debianppc
!
!
If no repositories have been configured, add repositories as needed. For more information, refer to
Section 3.12.5.3, "Adding a
Section 3.12.5.2
Checking the Repository Connection
To check the connection with a repository, type:
admin software-upgrade apps check-repository-connection app-name name
Where:
• name is the name of the repository as it appears in the repository configuration. To check the connection with
more than one repository, use a comma seperated list.
The connection results are displayed.
80
Repository".
VERSION
rs2
Managing Application Repositories
RUGGEDCOM ROX II
CLI User Guide
Advertisement
Table of Contents
Troubleshooting
