Table of Contents
Advertisement
Chapter 5
Setup and Configuration
Section 5.15.10
Managing Custom Host Client Configurations
Custom configuration settings can be set for each host client.
The following sections describe how to configure and manage custom host client configurations on a DHCP
server:
•
Section 5.15.10.1, "Viewing a List of Custom Host Client Configurations"
•
Section 5.15.10.2, "Adding Custom Host Client Configurations"
•
Section 5.15.10.3, "Deleting Custom Host Client Configurations"
Section 5.15.10.1
Viewing a List of Custom Host Client Configurations
To view a list of custom configurations for host clients on the DHCP server, type:
show running-config services dhcpserver host options client custom
If custom configurations have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config services dhcpserver host options client custom
services
dhcpserver
host 157
options
client
custom 120 500
!
!
!
!
!
!
If no custom configurations have been configured for the host client, add custom configurations as needed. For
more information, refer to
Section 5.15.10.2
Adding Custom Host Client Configurations
To add a custom configuration to a host client on the DHCP server, do the following:
1.
Make sure the CLI is in Configuration mode.
2.
Add the custom configuration by typing:
services dhcpserver host host options client custom number value
Where:
• host is the name of the host
• number is the number assigned to the host
• value is the value of the custom option
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
252
Section 5.15.10.2, "Adding Custom Host Client
Configurations".
Managing Custom Host Client Configurations
RUGGEDCOM ROX II
CLI User Guide
Advertisement
Table of Contents
Troubleshooting
