Chapter 4
System Administration
Parameter
job-command { job-command }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 4.11.3
Deleting a Scheduled Job
To delete a scheduled Job, do the following:
1.
Make sure the CLI is in Configuration mode.
2.
Delete the scheduled job by typing:
no admin scheduler schedule-jobs name
Where:
• name is the name of the scheduled job
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
190
Description
Synopsis: A string 1 to 1024 characters long
One or more commands to execute at the scheduled time. For example, this command
saves the running configuration to a file name 'myconfig': show running-config | save
myconfig. Do not use interactive commands or commands that require a manual
response or confirmation. When entered in the CLI, the command string must be
enclosed in quotation marks. When entered in the WebUI, the command string must not
be enclosed in quotation marks.
RUGGEDCOM ROX II
CLI User Guide
Deleting a Scheduled Job