Chapter 5
Setup and Configuration
2.
Navigate to apps » crossbow » client-connection and configure the following parameter(s):
Parameter
ipaddr { ipaddr }
port { port }
ClientConnectionTimeout { ClientConnectionTimeout }
DeviceSessionTimeout { DeviceSessionTimeout }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.42.3
Configuring the SAC Connection
To configure the SAC connection for CrossBow, do the following:
1.
Make sure the CLI is in Configuration mode.
Navigate to apps » crossbow » sac-connection and configure the following parameter(s):
2.
Parameter
{ sam-ipaddr }
sam-name { sam-name }
sam-port { sam-port }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.42.4
Configuring CROSSBOW Certificates and Private Keys
To configure a certificate and and private key for RUGGEDCOM CROSSBOW, do the following:
1.
Make sure the CLI is in Configuration mode.
2.
Add a certificate. For more information, refer to
3.
Add a private key. For more information, refer to
614
Description
The IP address to which a client will connect to the Station
Access Controller (SAC).
Synopsis: An integer between 0 and 65535
Default: 21000
The TCP port to which a client will connect to the Station Access
Controller (SAC).
Default: 15
The Client Connection Timeout in minutes (set to 0 for no
timeout).
Default: 15
The Device Session Timeout in minutes (set to 0 for no timeout).
Description
The IP address of Secure Access Manager (SAM - parent of SAC) to which the Station
Access Controller (SAC) will connect.
Synopsis: A string 1 to 128 characters long
The common name in the certificate that the Secure Access Manager (SAM - parent
of SAC) will present when mutually authenticating with the Station Access Controller
(SAC).
Synopsis: An integer between 0 and 65535
Default: 21000
The TCP port of SAM (parent of SAC) to which SAC (Station Access Controller) will
connect.
Section 4.7.4.3, "Adding a Certificate"
Section 4.7.2.2, "Adding a Private
RUGGEDCOM ROX II
CLI User Guide
Key".
Configuring the SAC Connection