RUGGEDCOM ROX II
CLI User Guide
Section 3.10
Managing the Software Configuration
Configuration parameters for RUGGEDCOM ROX II can be saved on the device and loaded in the future.
The following sections describe how to save and load the RUGGEDCOM ROX II software configuration:
•
Section 3.10.1, "Saving the Configuration"
•
Section 3.10.2, "Loading a Configuration"
Section 3.10.1
Saving the Configuration
To save the configuration settings for RUGGEDCOM ROX II as a separate file, type:
admin full-configuration-save format cli file-name filename
Where:
• filename is the name of the configuration file
Alternatively, to include only the default configuration parameter values in the saved configuration file, do the
following:
1.
Make sure the CLI is in Configuration mode.
2.
Save the default values by typing:
save filename | details
Where:
• filename is the name of the configuration file
If required, once the configuration file has been saved, back it up to a USB mass storage drive. For more
information, refer to
Section 3.10.2
Loading a Configuration
To load a configuration file for RUGGEDCOM ROX II, do the following:
IMPORTANT!
RUGGEDCOM ROX II only accepts configuration files from devices with the same hardware profile
running the same software version. It is recommended to only load configuration files from the same
device.
1.
[Optional] Install the configuration file on the device. For more information, refer to
Files".
2.
Load the configuration file by typing:
admin full-configuration-load format cli file-name filename
Where:
• filename is the name of the configuration file
Managing the Software Configuration
Section 3.8.2, "Backing Up
Files".
Chapter 3
Device Management
Section 3.8.1, "Installing
71