RUGGEDCOM ROX II
CLI User Guide
Parameter
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Section 5.15.11.4
Configuring a Host Group Client
To configure a client for a host on the DHCP Server, do the following:
1.
Make sure the CLI is in Configuration mode.
2.
Navigate to services » dhcpserver » host-groups » {host} » options » client, where {host} is the name of
the host group.
3.
Configure the following parameter(s) as required:
Parameter
hostname { hostname }
subnetmask { subnetmask }
default-route { default-route }
broadcast { broadcast }
domain { domain }
dns-server { dns-server }
static-route { static-route }
server { server }
domain { domain }
scope { scope }
nameserver { nameserver }
Configuring a Host Group Client
Description
The maximum leased time in seconds that the server offers to the clients.
Description
Synopsis: A string 1 to 32 characters long
The unique name to refer to the host within a DHCP configuration.
Synopsis: A string 7 to 15 characters long
Subnet mask
Synopsis: A string 7 to 15 characters long
The default route that the server offers to the client when it issues the lease to the client.
Synopsis: A string 7 to 15 characters long
The broadcast address that the server offers to the client when it issues the lease to the
client.
Synopsis: A string 1 to 256 characters long
The domain name that the server offers to the client when it issues the lease to the
client.
Synopsis: A string 7 to 31 characters long
The domain name server that the server offers to the client when it issues the lease to
the client.
Synopsis: A string 7 to 15 characters long
The static route that the DHCP server offers to the client when it issues the lease to the
client.
Synopsis: A string 7 to 15 characters long
The NIS server address that the DHCP server offers to the client when it issues the
lease to the client.
Synopsis: A string 1 to 256 characters long
The NIS domain name that the DHCP server offers to the client when it issues the lease
to the client.
Synopsis: A string 1 to 256 characters long
Default: netbios
The NetBIOS scope that the DHCP server offers to the client when it issues the lease to
the client.
Synopsis: A string 1 to 256 characters long
Default: 127.0.0.1
Chapter 5
Setup and Configuration
255