Table of Contents
Advertisement
Chapter 2
Using RUGGEDCOM ROX II
CAUTION!
Security hazard – risk of unauthorized access and/or exploitation. To prevent unauthorized access to
the device, change the default passwords before commissioning the device. For more information,
refer to
Section 4.10, "Managing Passwords and
Mode
Service
Maintenance
Administrator
Operator
Guest
Section 2.3
Logging In
To log in to RUGGEDCOM ROX II, do the following:
1.
Connect to the device. For more information about the various methods of connecting to the device, refer
Section 2.1, "Connecting to RUGGEDCOM ROX
2.
Once a connection is established with the device, press Enter. The login prompt appears.
NOTE
RUGGEDCOM ROX II features three default user accounts: admin, operator and guest. Additional
user accounts can be added. For information about adding user accounts, refer to
"Adding a
3.
Type the user name and press Enter. The password prompt appears.
NOTE
If a unique password/passphrase has not been configured, use the factory default password. For
more information, refer to
IMPORTANT!
RUGGEDCOM ROX II features a Brute Force Attack (BFA) protection system to detect potentially
malicious attempts to access the device. When enabled, the protection system will block an IP
address after 15 failed login attempts over a 10 minute period. The IP address will be blocked
for 720 seconds or 12 minutes the first time. If the same IP address fails again 15 times in a 10
minute period, it will be blocked again, but the waiting period will be 1.5 times longer than the
previous wait period.
Siemens strongly recommends that BFA protection be enabled. For more information about
enabling BFA protection, refer to
BFA protection is enabled by default for new installations of RUGGEDCOM ROX II.
4.
Type the password associated with the username and press Enter.
login as: admin
admin@127.0.0.1's password:
Welcome to Rugged CLI
18
Username
root
root
admin
oper
guest
User".
Section 2.2, "Default User Names and
Section 5.6, "Enabling/Disabling Brute Force Attack
Passphrases".
Password
admin
admin
admin
oper
guest
II".
RUGGEDCOM ROX II
CLI User Guide
Section 4.9.2,
Passwords".
Protection".
Logging In
Advertisement
Table of Contents
Troubleshooting
