RUGGEDCOM ROX II
CLI User Guide
Device Management
This chapter describes how to configure and manage the device and its components, such as module interfaces,
logs and files. It describes the following tasks:
NOTE
For information about how to configure the device to work with a network, refer to
Configuration.
•
Section 3.1, "Determining the Product Version"
•
Section 3.2, "Viewing Chassis Information and Status"
•
Section 3.3, "Viewing the Parts List"
•
Section 3.4, "Shutting Down the Device"
•
Section 3.5, "Rebooting the Device"
•
Section 3.6, "Restoring Factory Defaults"
•
Section 3.7, "Decommissioning the Device"
•
Section 3.8, "Managing Files"
•
Section 3.9, "Managing Logs"
•
Section 3.10, "Managing the Software Configuration"
•
Section 3.11, "Upgrading/Downgrading the RUGGEDCOM ROX II Software"
•
Section 3.12, "Managing RUGGEDCOM ROX II Applications"
•
Section 3.13, "Managing Feature Keys"
•
Section 3.14, "Managing Fixed Modules"
•
Section 3.15, "Managing Line Modules"
•
Section 3.16, "Managing Event Trackers"
•
Section 3.17, "Managing Switched Ethernet Ports"
•
Section 3.18, "Managing Routable Ethernet Ports"
•
Section 3.19, "Managing Serial Ports"
•
Section 3.20, "Managing Serial Port Protocols"
•
Section 3.21, "Managing Ethernet Trunk Interfaces"
•
Section 3.22, "Managing Cellular Modem Interfaces"
•
Section 3.23, "Managing WAN Interfaces"
•
Section 3.24, "Managing Virtual Switches"
•
Section 3.25, "Managing a Domain Name System (DNS)"
Chapter 3
Device Management
Chapter 5, Setup and
49