Table of Contents
Advertisement
•
- to change entries in the list.
The default value is
You can use the Trap Host mechanism to inform a network administrator
when somebody resets the Radio Link Module, does the forced reload
procedure or if there is an authentication failure or a link up or down is
detected. The trap host alert will enable the network administrator to verify
whether the reset or forced reload action was an authorized action or not.
To activate the trap host mechanism:
1. Start the RLM Manager and select the Radio Link Module.
2. Click the
3. Select the
4. In the field
•
Radio Link Module is reset.
•
5. Enter a password in the field
Choose a password that corresponds to the password set at the Trap
Host to filter unsolicited or unauthorized SNMP Trap messages at the
Trap Host.
180
button to connect to the RLM.
tab to display the SNMP parameters.
- To this IP address a message is send if the
- To disable SNMP Trap Agent.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
.
enter:
.
C79000-G8976-C171-01
Advertisement
Table of Contents
