Table of Contents
Advertisement
Chapter 5
Setup and Configuration
Parameter
notification-interval { notification-interval }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.38.2
Viewing Global Statistics and Advertised System Information
To view global statistics for LLDP, type:
show switch net-discovery lldp global-statistics
A table or list similar to the following appears:
ruggedcom# show switch net-discovery lldp global-statistics
global-statistics
inserts
deletes
drops
ageouts
last change time 3D14m19s
This table or list displays the following information:
Parameter
inserts
deletes
drops
ageouts
last-change-time
To view the system information that is advertised to neighbors, type:
show switch net-discovery lldp local-system
A table or list similar to the following appears:
562
21
20
0
8
Description
The delay in seconds between successive LLDP frame
transmissions initiated by the value or status changed. The
recommended value is set by the following formula: 1 is less than
or equal to txDelay less than or equal to (0.25 * Tx Interval)
Synopsis: An integer between 5 and 3600
Default: 5
Controls transmission of LLDP traps. The agent must not
generate more than one trap in an indicated period.
Description
Synopsis: An integer between 0 and 4294967295
The number of times an entry was inserted into the LLDP Neighbor
Information Table.
Synopsis: An integer between 0 and 4294967295
The number of times an entry was deleted from the LLDP Neighbor
Information Table.
Synopsis: An integer between 0 and 4294967295
The number of times an entry was deleted from the LLDP Neighbor
Information Table because the information timeliness interval has
expired.
Synopsis: An integer between 0 and 4294967295
The number of all TLVs discarded.
Synopsis: A string
The duration of time between power-on and when this information
was received.
Viewing Global Statistics and Advertised System
RUGGEDCOM ROX II
CLI User Guide
Information
Advertisement
Table of Contents
Troubleshooting
