Managing Mac Addresses; Viewing A Dynamic List Of Mac Addresses - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
1. Make sure the CLI is in Configuration mode.
2. Delete the entry by typing:
no switch class-of-service dscp-to-cos dscp
Where:
• dscp is the value of the 6 bit DiffServ field in the Type-Of-Service (TOS) field of the IP header
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.35

Managing MAC Addresses

The following sections describe how to configure and manage MAC addresses:
• Section 5.35.1, "Viewing a Dynamic List of MAC Addresses"
• Section 5.35.2, "Purging the Dynamic MAC Address List"
• Section 5.35.3, "Configuring MAC Address Learning Options"
• Section 5.35.4, "Managing Static MAC Addresses"
Section 5.35.1

Viewing a Dynamic List of MAC Addresses

To view a dynamic list of learned MAC addresses, type:
show switch mac-tables mac-table
A table or list similar to the following example appears:
ruggedcom# show switch mac-tables mac-table
MAC
------------------------------------------------------
00:0a:dc:78:f3:20
00:0a:dc:78:fc:45
00:0a:dc:f6:8b:ff
00:10:94:00:24:01
00:10:94:00:30:01
00:10:94:00:40:01
00:13:3b:00:04:1a
00:13:3b:00:06:b5
This table or list provides the following information:
Parameter
mac
vid
slot
port
Managing MAC Addresses
VID SLOT PORT TYPE
1 lm1 1 dynamic
1 lm1 1 dynamic
4085 lm1 2 static
4084 lm1 1 static
1 lm1 2 static
4086 lm1 2 static
1 lm1 1 dynamic
1 lm1 1 dynamic
Description
Synopsis: A string
The MAC address learned by the switch.
The VLAN identifier of the VLAN upon which the MAC address operates.
Synopsis: { sm, lm1, lm2, lm3, lm4, lm5, lm6, swport, eth, serport, celport }
The slot containing the module including the port.
Synopsis: An integer between 1 and 16
COS
normal
normal
normal
normal
normal
normal
normal
normal
Chapter 5
Setup and Configuration
509