Siemens RUGGEDCOM ROX II User Manual page 426

Chapter 5
Setup and Configuration
Parameter
{ vrf-name }
enabled
abr-type { abr-type }
auto-cost-reference-bandwidth { auto-cost-
reference-bandwidth }
compatible-rfc1583
default-information-originate
default-metric { default-metric }
distance { distance }
opaque-lsa
passive-default
refresh-timer { refresh-timer }
router-id { router-id }
always
metric { metric }
metric-type { metric-type }
route-map { route-map }
external { external }
inter-area { inter-area }
388
Description
The VRF name.
Synopsis: typeless
Enables the OSPF dynamic routing protocol.
Synopsis: { cisco, ibm, shortcut, standard }
Default: cisco
The OSPF ABR type.
Synopsis: An integer between 1 and 4294967
Default: 100
Calculates the OSPF interface cost according to bandwidth [1-4294967 Mbps]
Synopsis: typeless
Enables the compatibility with the obsolete RFC1583 OSPF (the current is RFC2178)
Synopsis: typeless
Advertises the default route.
Synopsis: An integer between 0 and 16777214
The default metric of redistribute routes.
Synopsis: An integer between 1 and 255
The administrative distance.
Synopsis: typeless
Enables the Opaque-LSA capability (RFC2370).
Synopsis: true or false
Default: true
Default passive value for new interface.
Synopsis: An integer between 10 and 1800
Default: 10
The refresh timer.
Synopsis: A string 7 to 15 characters long
The Router ID for OSPF.
Synopsis: true or false
Default: false
Always advertise default route even when there is no default route present in routing
table.
Synopsis: An integer between 0 and 16777214
The metric value for default route.
Synopsis: An integer between 1 and 2
Default: 2
The metric type for default route.
The route map name.
Synopsis: An integer between 1 and 255
The administrative distance for external routes.
Synopsis: An integer between 1 and 255
The administrative distance for inter-area routes.
Adding a VRF Instance and Configuring OSPF
RUGGEDCOM ROX II
CLI User Guide