Activating Rmon History; Deleting Configuration Of Rmon History; Displaying Rmon History - Siemens S223 User Manual

UMN:CLI
i
7.4.1.5
i
7.4.1.6
7.4.1.7
i
128
1 sec is the minimum time which can be selected. But the minimum sampling interval
currently is 30 sec, i.e., all intervals will be round up to a multiple of 30 seconds.

Activating RMON History

To activate RMON history, use the following command.
Command
active
Before activating RMON history, check if your configuration is correct. After RMON history
is activated, you cannot change its configuration. If you need to change configuration, you
need to delete the RMON history and configure it again.

Deleting Configuration of RMON History

When you need to change a configuration of RMON history, you should delete an existing
RMON history.
To delete RMON history, use the following command.
Command
no rmon-history <1-65535>

Displaying RMON History

To display RMON history, use the following command.
Command
show running-config
history
Always the last values will be displayed but no more than the number of the granted
buckets.
The following is an example of displaying RMON history.
SWITCH(config-rmonhistory [5])# show running-config rmon-history
!
rmon-history 5
owner test
data-source ifindex.hdlc1
interval 60
requested-buckets 25
active
!
SWITCH(config-rmonhistory [5])#
Mode
RMON Activates RMON history.
Mode
Deletes RMON history of specified number, enter the
RMON
value for deleting.
Mode
rmon-
All Shows a configured RMON history.
SURPASS hiD 6615 S223/S323 R1.5
Description
Description
Description
A50010-Y3-C150-2-7619
User Manual