Deleting/Modifying An Individual Offset Value - Siemens Sinumerik 810T User Manual

09.91

3.1.4.2 Deleting/modifying an individual offset value

0
S
or
• • • • • •
© Siemens AG 1990 All Rights Reserved
SINUMERIK 810T, GA3 (BN)
You select the desired tool offset number under which you intend
to delete/modify an offset value with the "Page up/down" keys.
With these keys you position the cursor at the input field to be
deleted/modified.
Using the numerical keys you enter the value "zero"
(delete) ...
or
... Using the numerical keys you enter a new value
(modification).
With this key you transfer the deletion or modification into the
offset memory.
6ZB5 410-0EP02
3 Operating Sequences
3.1.4 Tool offset
3-9