Recording A Private Message; Table 3-3 Setting Up And Recording Greetings; Table 3-4 Recording A Private Message - Siemens HiPath 3000 User Manual

XPR100us03.fm
Mailbox Use and Operation
Individual Mailbox Functions
After accessing the function, the mailbox owner has the following options:
Function
Select the next greeting (only if more than one greeting exists and the ma-
nual greeting control is being used)
Repeat the selected greeting.
Delete personal greeting and replace with system greeting.
Disable system greeting and replace with a personal greeting (new recor-
ding).
Users have the following options after pressing the 0 key twice:
Begin the recording anew (only during recording)
End recording.
When the recording is finished, it is played back immediately.
Table 3-3 Setting Up and Recording Greetings
If no personal greeting is recorded, the caller hears the system greeting.
3.4.3

Recording a Private Message

A private message can be recorded for authorized mailboxes.
Function
Play back private message
Delete a private message
Record a private message
End recording
While recording, begin recording again
Table 3-4 Recording a Private Message
Note:
>
A caller hears a private message after entering an agreed upon numeric code (code
number for private messages). The caller enters the code number during the gree-
ting, preceded by a *.
3-8
Nur für den internen Gebrauch
Key
(STD)
8
2
0
0
0
#
Key
(STD)
2
0
0
#
0
HiPath Xpressions Compact V2.0
Key
(XP)
4
3
6
1
(no key)
*
Key
(XP)
3
6
1
*
-