NEC V850E/PH2 User Manual page 362

Operation Mode
Interval mode
External event count mode TRnCCR4 compare
External trigger pulse
output mode
One-shot pulse mode
PWM mode
Free-running mode
Pulse width measurement
mode
Triangular wave PWM
mode
High-accuracy T-PWM
mode
PWM mode with dead time TRnCCR4 compare
Notes: 1. If set in the range of 0000H ≤ TRnCCRm < TRnDTC0, (TRnCCR0 - TRnDTC1)
< TRnCCRm ≤ TRnCCR0 (m = 1 to 5), no compare match interrupt is output.
2. If set to TRnCCR0 < TRnCCRm (m = 1 to 5), no compare match interrupt is output.
3. If a setting error has been made for TRnCCR0, TRnDTC0, TRnDTC1, an overflow interrupt
(INTTRnOV) is output.
Remarks: 1. "-" in the table indicates inactive level output.
2. n = 0, 1
362
Chapter 10 16-bit Inverter Timer/Counter R
Table 10-4: List of Interrupts in Each Mode (2/2)
INTTRnCC4
TRnCCR4 compare TRnCCR5 compare
match interrupt match interrupt
TRnCCR5 compare
match interrupt match interrupt
TRnCCR4 compare TRnCCR5 compare
match interrupt match interrupt
TRnCCR4 compare TRnCCR5 compare
match interrupt match interrupt
TRnCCR4 compare TRnCCR5 compare
match interrupt match interrupt
TRnCCR4 compare TRnCCR5 compare
match interrupt match interrupt
-
TRnCCR4 compare TRnCCR5 compare
match interrupt match interrupt
TRnCCR4 compare TRnCCR5 compare
match interrupt match interrupt
Note 1 Note 1
TRnCCR5 compare
match interrupt match interrupt
Note 2 Note 2
User's Manual U16580EE3V1UD00
INTTRnCC5 INTTRnOV
Overflow interrupt
- Overflow interrupt
Overflow interrupt
Note 3
INTTRnER
- -
- -
- -
- -
- Error interrupt
-
-
- Error interrupt
Error interrupt
- Error interrupt