NEC V850E/PH2 User Manual page 359

Operation Mode
Interval mode Toggle output upon
TRnCCR4 compare
match
External event count Toggle output upon
mode TRnCCR4 compare
match
External trigger pulse External trigger pulse
output mode waveform output
One-shot pulse mode High upon TRnCCR4
match. Inactive upon
TRnCCR0 match.
PWM mode PWM output upon
TRnCCR4 compare
match
Free-running mode Toggle output upon
TRnCCR4 compare
match
Pulse width
measurement mode
Triangular wave PWM output upon
PWM mode TRnCCR4 compare
match
High-accuracy Inverted phase output
T-PWM mode to TORn3
PWM mode with Inverted phase output
dead time to TORn3
Note: For details on TORn7, refer to 10.4.3 (a) TORn7 pin output control.
Chapter 10 16-bit Inverter Timer/Counter R
Table 10-3: List of Timer Outputs in Each Mode (2/2)
TORn4
Toggle output upon
TRnCCR5 compare
match
Toggle output upon
TRnCCR5 compare
match
External trigger pulse
waveform output
High upon TRnCCR5
match. Inactive upon
TRnCCR0 match.
PWM output upon
TRnCCR5 compare
match
Toggle output upon
TRnCCR5 compare
match
-
PWM output upon
TRnCCR5 compare
match
PWM output (with
dead time) upon
TRnCCR3 compare
match
PWM output (with
dead time) upon
TRnCCR3 compare
match
User's Manual U16580EE3V1UD00
TORn5 TORn6
-
Inverted phase output
to TORn5
Inverted phase output
to TORn5
TORn7
- -
- -
- -
- -
- Pulse output upon
A/D conversion
Note
trigger
- -
- -
- Pulse output upon
A/D conversion
Note
trigger
Pulse output upon
A/D conversion
Note
trigger
Pulse output upon
A/D conversion
Note
trigger
359