Dual Configuration; Selecting The User - GRAPHTEC FCX4000 SERIES User Manual

4.3
Dual Configuration
This cutting plotter can save independently the two types of settings.
This is called "dual configuration".
Using the dual configuration, the setting can be quickly switched to
other settings.
When worked with two operators, the settings for each operator
can be saved separately, in addition, the two types of settings that
conform to the media can be saved, the operator can switch quickly
the condition settings at the time of the media replacement.
Dual configuration is done by selecting the user.
There are USER 1 (upper LED lights) and USER 2 (lower LED lights)
as a user.

Selecting the user

Operation
1
Press the [USER1/2] key in the default screen.
User changing screen is displayed.
2
Press the [1] key (Yes).
The "USER 1/2 lamp" that is switched by the [USER1/2] key
lights.
The user is selected and then the plotter is reset.
Supplement
When the user is switched USER 1 to/from
USER 2, the cutting data will disappear.
Supplement
When the "User Key" is set to "DISABLED",
the error message is displayed.
Please set the "User Key" to "ENABLED" in
the ADV. setting screen.
4-12