GRAPHTEC FCX4000 SERIES User Manual page 81

8
Change the media.
"USE THE POSITION KEY TO MOVE TOOL AND THEN PRESS
ENTER." will be displayed on the screen.
9
The cutting plotter starts a copy immediately after changing
the media.
This operation's specified number of copies will be repeated.
To suspend, press the [ESC] key (CANCEL).
Supplement
Cutting data is stored even if the media is
exchanged. It can be copied as many times
until the buffer memory is cleared. It can be
copied again after exchanging the media by
pressing [COPY] key.
4-11