GRAPHTEC FCX4000 SERIES User Manual page 130

8
Press the POSITION (
the setting value.
9
Confirm the setting and press the [ENTER] key (SET).
Adjustment by scanning the registration mark is completed, and it will
return to default screen.
) keys and increase or decrease
5-48
Supplement
•
Measured distance is displayed in the top
line in the DISTANCE input screen. Input
value (initially same as measured value)
is displayed under that.
•
If the input value is not changed, it
will assume that there is no difference
betweenthe measured distance and the
distance in the data.
•
Digits of settings can be changed by
pressing the [SLOW] key.
Supplement
•
It will return to default screen without
changing the settings when you press the
[ESC] key (CANCEL).
•
Distance input screen for point 3 is displayed
if it is set to 3POINTS or more, so repeat steps
8 and 9 to set.