Set The Enlarge/Shrink Scale (Scale) - GRAPHTEC FCX4000 SERIES User Manual

5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to AREA PARAMETERS screen (1/2).
6
Press the [PAUSE/MENU] key.
The tool carriage moves to the coordinate position you set.
It will return to default screen.
Set the enlarge/shrink scale (Scale)
It can enlarge or shrink cutting.
The rate of enlargement or shrinkage of the cutting data can be changed by settings.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [3] key (AREA).
AREA PARAMETERS screen (1/2) is displayed.
3
Press the [1] key (SCALE).
SCALE setting screen is displayed.
4
Press the POSITION (
the setting value.
) keys and increase or decrease
4-5
Supplement
It will return to AREA PARAMETERS screen
(1/2) without changing the settings when you
press the [ESC] key (CANCEL).
Supplement
Values that can be set are 1/8, 1/4, 1/2, 1, 2, 3,
4, 5, 6, 7, and 8 (multiplications).