GRAPHTEC FCX4000 SERIES User Manual page 240

6
Press the [1] key (DONE 1/2) or the [2] key (DONE 2/2).
Message to confirm tool position is displayed.
7
Press the POSITION (
to print start position.
8
Confirm that moving parts of the tool and media can safely
operate and press the [ENTER] key.
Selected page of the CONDITION LIST is printed.
9
When the printing is finished, it will return to READY status.
)keys and move the tool carriage
14-16
Supplement
Press the [ESC] key (CANCEL CONDITION)
to return to the TEST menu screen without
printing the list.
CAUTION
Do not place you hand around the moving
areas. The tool carriage will start moving, so
there is a chance of injury.
Supplement
Set the media and repeat steps 6 to 8 to print
different page at this point.