GRAPHTEC FCX4000 SERIES User Manual page 117

2
Press the [2] key (ARMS).
ARMS SETTING screen (1/5) is displayed.
3
Press the POSITION ( ) key three.
ARMS SETTING screen (4/5) is displayed
4
Press the [4] key (SCAN STEP).
SCAN STEP screen is displayed.
5
Press the POSITION (
the setting value.
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS SETTING screen (4/5).
7
Press the [PAUSE/MENU] key.
It will return to the default screen.
) keys and increase or decrease
5-35
Supplement
It will return to ARMS SETTING screen (4/5)
without changing the settings when you
press the [ESC] key (CANCEL).
Supplement
Setting range is 0 , 5, 10, 15 (μm).
Supplement
It will return to ARMS SETTING screen
without changing the settings when you
press the [ESC] key (CANCEL).