GRAPHTEC FCX4000 SERIES User Manual page 39

4
Confirm the setting and press the [ENTER] key.
Setting will be set, and it will return to CONDITION screen (1/4).
5
Press the [COND/TEST] key.
It will return to default screen.
Operation Method: Operation with the [ENTER] key
1
Press the [ENTER] key from READY status.
CONDITION No. selection screen is displayed.
2
Select the CUT CONDITION (Tool Condition) by pressing
one of [1] to [4] key or using the POSITION (
while holding down the [ENTER] key. (The selected item is
highlighted.)
3
Confirm the setting and release the [ENTER] key.
It will return to default screen.
Supplement
Press the [ESC] before pressing the [ENTER]
key to return to the default screen without
changing any settings.
) keys
2-17