GRAPHTEC FCX4000 SERIES User Manual page 213

5
Press the POSITION (
start mark position.
Start mark
6
Confirm the tool position and press [ENTER] key.
The bar code is scanned. When completed, the following screen is
displayed.
7
Find the file, and then start cutting.
8
When completed, it will become READY status.
) keys and move the tool to the
Bar code
12-5
Supplement
•
When the start mark is not detected, the
following screen is displayed.
Supplement
•
If the appropriate files are found, select
the proper file.
•
If the appropriate files is not found, the
following screen is displayed.