Default Screen (READY Screen)
The condition number (Cut Condition) that has been set is displayed.
Supplement
•
In this manual, this screen is referred as READY screen or READY status.
•
In this READY status, you can set the cutting and communication conditions by pressing [PAUSE/MENU] or [COND/TEST]
key.
•
When it is in the draft mode, the (D) is displayed after the READY.
Screen to set the corresponding conditions is displayed when the [PAUSE/MENU] key or [COND/TEST] key is
pressed.
[PAUSE/MENU]
It will return to default screen
when [PAUSE/MENU] key is
pressed while displaying MENU
screen.
Menu Screen
Page number is displayed in the upper right corner of the screen if there are many settings or selection that will
need multiple pages to display.
Press the POSITION (
) key to move to different page.
[3] key
Example of moving page and operation button
[COND/TEST]
It will return to default screen
when [COND/TEST] key is
pressed while displaying
CONDITION screen.
Condition Screen
2-9
Page number
,
POSITION (
)
Page number