GRAPHTEC FCX4000 SERIES User Manual page 109

3
Press the [2] key (ARMS).
ARMS SETTING screen (1/5) is displayed.
4
Press the POSITION ( ) key twice.
ARMS SETTING screen (3/5) is displayed.
5
Press the [3] key (SENSOR OFFSET ADJ.).
SENSOR OFFSET ADJ. screen is displayed.
6
Press the POSITION (
carriage to the area to start scanning of the registration mark.
Registration mark scanning area
Align the tool to this area.
7
Confirm the position of the tool, and if it is OK, press the
[ENTER] key.
The registration mark for comparison is plotted after scanning the
registration mark (see below). It will return to SENSOR OFFSET ADJ.
screen once the plotting is completed.
Registration mark
for comparison
Registration mark for
) keys and move the tool
Distance adjustment value X
Distance adjustment value Y
adjustment
Supplement
It will return to ARMS SETTING screen (3/5)
without changing the settings when you
press the [ESC] key (CANCEL).
Supplement
It will return to SENSOR OFFSET ADJ.
screen without plotting when you press the
[ESC] key (CANCEL).
5-27