14.4
Plotting the CUTTING PRO
To check the operation of the cutting plotter, plot a test pattern.
CAUTION
Do not place your hand around the moving areas. The tool carriage will start moving, so there is a chance of injury. Tool
carriage will start to move immediately after selecting to plot the test pattern.
Operation
1
Set a media larger than A3 size.
2
Set the tool to the tool holder and select the condition where
the tool is set.
3
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
4
Press the POSITION ( ) key (TEST).
TEST menu screen (1/2) is displayed.
5
Press the [4] key (CUTTING PRO).
CUTTING PRO start screen is displayed.
Supplement
See "Loading Media " for loading the media.
Supplement
•
See "Attaching a Tool" for setting the tool.
•
14-19
For changing the tool conditions please
refer to "Selecting Tool Condition", and
for tool settings please refer to "Setting
the Tool"..