GRAPHTEC FCX4000 SERIES User Manual page 185

9
Press the [1] key (8 BIT) or the [2] key (7 BIT).
DATA BIT will be set, and it will return to RS-232C setting screen.
10
Press the [3] key (PARITY).
PARITY setting screen is displayed.
11
Press the [1] key (NONE), [2] key (EVEN), or the [3] key (ODD).
PARITY will be set, and it will return to RS-232C setting screen.
12
Press the [4] key (HANDSHAKE).
HANDSHAKE setting screen is displayed
13
Press the [1] key (HARDWIRE), the [2] key (Xon/off), or the [3]
key (Enq/Ack).
HANDSHAKE will be selected, and it will return to RS-232C setting
screen.
14
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to INTERFACE screen (2/3).
15
Press the [PAUSE/MENU] key.
It will return to default screen.
Supplement
•
Match the setting value of the application
being used currently.
•
It will return to RS-232C setting screen
without changing the settings when you
press [ESC] key (CANCEL).
Supplement
•
Match the setting value of the application
being used currently.
•
It will return to RS-232C setting screen
without changing the settings when you
press [ESC] key (CANCEL).
Supplement
•
Match the setting value of the application
being used currently.
•
It will return to RS-232C setting screen
without changing the settings when you
press [ESC] key (CANCEL).
•
Enq/Ack setting is valid only when it is
set to HP-GL. It will be set to HARDWIRE
even if Enq/Ack is selected when it is set
to GP-GL.
9-13