GRAPHTEC FCX4000 SERIES User Manual page 181

13
Confirm the setting and press the [ESC] key (PREVIOUS).
Network (LAN) setting screen is displayed.
14
Confirm the setting and press the [ENTER] key (SET).
When the settings are changed, the cutting plotter is reset and default
screen is displayed.
Supplement
When you press the [ ] key in the Network
(LAN) setting screen, the Mac address is
displayed.
Supplement
It will return to INTERFACE screen (2/3)
without changing the settings when you
press the [ESC] key (CANCEL).
9-9