1.3
Connecting to the Computer
Connect the plotter to the computer using the communication cable. Use either the USB interface, the RS-232C
interface or network (LAN) interface to connect the plotter to the computer. Select the port depending on the
specification of the software to be used and the availability of the interface port on the computer.
Please install the drive software before connecting.
Depending on the port used, use either the USB cable (standard accessories), the RS-232C cable (sold
separately) or network (LAN) cable (sold separately) to connect. Use the cables specified by Graphtec, matching
the computer that is to be connected.
Connection
1
Make sure that the power switch is turned off (" " side).
1-4