Main Specifications; External Dimensions; Fcx4000-50Es; A.1 Main Specifications - GRAPHTEC FCX4000 SERIES User Manual

A.1

Main Specifications

Configuration
Drive system
Media hold-down method
Cutting area
Mountable media width
Specifiable speeds
Max. acceleration
Specifiable speeds
Max. force
Settable force
Min. character size
Mechanical resolution
Programmable resolution
Distance accuracy
Right angle accuracy
Repeatable accuracy
Interface
Buffer memory
Resident command sets
Number of cutters/pens
Tool type
Compatible media
Offline output function
Bar code data management
function
LCD display
Power supply
Power consumption
Operating environment
Guaranteed accuracy
environment

External dimensions

(W × D × H)
Weigh (Approx.)
*1 : HP-GL is a registered trademark of the US Hewlett Packard Company.
*2 : Please use cutter blade CB15U or CB15U-K30
*3 : Use cutter blade CB15U-K30
*4 : Use Cutter blade CB15UA
*5 : It depends on our specified paper and conditions
*6 : The accuracy read with the pattern prepared for this plotter, using the attached pen and coated (glossy) paper

FCX4000-50ES

Flatbed
Digital servo
Electrostatic adhesion
660 mm × 488 mm
536 mm
75 cm/s (Omnidirection)
9.8 m/s (Omnidirection)
2
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75 cm/s 23 steps
Max. 5.88 N (600gf)
48 steps
About 10mm alphanumeric characters (depending on the materials and font) Our specified conditions
2
0.005 mm
GP-GL : 0.1/0.05/0.025/0.01 mm
HP-GL* : 0.025 mm
1
Distance moved within ±0.2% or less or within ±0.1 mm or less, whichever is larger (Plotter mode)
0.3 mm/430 mm or less (Plotter mode)
0.1 mm or less: Expansion and contraction of the media are excluded (plotter/cutting mode)
USB2.0 (full speed) , RS-232C, Ethernet 10BASE-T / 100BASE-TX
2 MB
GP-GL/HP-GL * (Control panel switching, Auto switching)
1
2
Cutter Plunger, Water based fiber-tip pen, Creasing tool
VC models
• Marking film (PVC/fluorescence/reflection)
• Thickness less than 0.5 mm paper *
• Thickness less than 0.8 mm compressed foam sheet *
• Thickness less than 1 mm Sandblasting rubber *
• F, G flute
• Clear package sheet
• High-intensity reflective film *
USB memory - 64 files
Yes
Graphic type (240 × 128 dot)
100 to 240V AC 50/60Hz
120 VA or less
10 to 35℃, 35 to 75 % R.H. (non-condensing)
16 to 32℃, 35 to 70 % R.H. (non-condensing)
1089 mm × 897 mm × 204 mm
29 kg
976 mm × 660 mm
708 mm
0.4 mm/610 mm or less (Plotter mode)
2
3
3
4
1405 mm × 1069 mm × 204 mm
1405 mm × 1097 mm × 896 mm (with optional stand)
37 kg
55 kg (with optional stand)
A-2
FCX4000-60ES