Enabling/Disabling The Condition Select Command (Tool Select Command) - GRAPHTEC FCX4000 SERIES User Manual

Enabling/Disabling the Condition Select Command (TOOL SELECT COMMAND)
Setting for what to do when the condition select command ("J" in GP-GL, and "SP" in HP-GL) is received. It will
ignore the condition select command when set to DISABLED.
Operation
1
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2
Press the [1] key (TOOL).
TOOLS SETTING screen (1/4) is displayed.
3
Press the POSITION [ ] key.
TOOLS SETTING screen (2/4) is displayed.
4
Press the [4] key (TOOL SELECT COMMAND SETTING).
TOOL SELECT COMMAND SETTING screen is displayed.
5
Press the [1] key (ENABLED) or the [2] key (DISABLED).
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to TOOLS SETTING screen (2/4).
7
Press the [PAUSE/MENU] key.
It will return to default screen.
Supplement
It will return to TOOLS SETTING screen (2/4)
without clearing the buffer when you press
the [ESC] key (CANCEL).
11-4