Setting The Scanning Method When Registration Marks Are Scanned ("Ism"/"Normal") - GRAPHTEC FCX4000 SERIES User Manual

4
Press the [2] key (SENSING SPEED).
SENSING SPEED screen is displayed.
5
Press the POSITION (
the setting value.
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS SETTING screen (4/5).
7
Press the [PAUSE/MENU] key.
It will return to the default screen.
Setting the Scanning Method When Registration Marks are Scanned ("ISM"/"NORMAL")
You can set the scanning method when the registration marks are scanned.
It is normally set to "NORMAL", but the registration marks cannot be scanned when the following media are used.
In that case, it will be improved by setting to "ISM".
• Media that the surface is laminated
• Media with hairlines
• Media other than white, or glossy media
* ISM (Intelligent Scan Mode) is a function to increase the scanning accuracy of the registration mark.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [2] key (ARMS).
ARMS SETTING screen (1/5) is displayed.
) keys and increase or decrease
5-33
Supplement
It will return to ARMS SETTING screen (4/5)
without changing the settings when you
press the [ESC] key (CANCEL).
Supplement
Setting range is 1 to 10 (cm/s).
Supplement
It will return to ARMS SETTING screen (4/5)
without changing the settings when you
press the [ESC] key (CANCEL).