GRAPHTEC FCX4000 SERIES User Manual page 155

3
Press the POSITION ( ) key.
TOOLS SETTING screen (4/4) is displayed.
4
Press the [2] key (INITIAL B. ANGLE POSITION).
INITIAL BLADE ANGLE POSITION setting screen is displayed.
5
Press the [1] key (2mm BELOW), the [2] key (Y OUTSIDE),
the [3] key (XY OUTSIDE) or the [4] key (SPECIFIED
POSITION).
When pressing the [4] key (SPECIFIED POSITION), you need
to specify the tool position by moving the tool.
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to TOOLS SETTING screen (4/4).
7
Press the [PAUSE/MENU] key.
It will return to default screen
Supplement
It will return to TOOLS SETTING screen (4/4)
without changing the setting when you press
the [ESC] key (CANCEL).
7-19