Setting Length of the Overcut
Set the length of overcut with tangential emulation.
Operation
1
Press the [CONDITION] key.
CONDITION setting screen (1/3) is displayed.
2
Press the POSITION (▲) key.
CONDITION setting screen (3/3) is displayed.
3
Press the [1] key (OVERCUT).
OVERCUT setting screen is displayed.
4
Press the [1] key CONDITION No.).
CONDITION No. selection screen is displayed.
5
Press the POSITION (▲▼) key and select the CONDITION No.
6
Confirm the setting, and press the POSITION (◄) key
(PREVIOUS).
C ONDITION No. is selected and return to OVERCUT setting
screen.
Next page
Supplement
POSITION
It will return to default screen without changing the
settings when you press the [CONDITION] key.
Supplement
It will return to the
without changing the settings when you press the
POSITION (◄) key (CANCEL).
POSITION
POSITION
7-4
CONDITION
screen
(3/3)