Setting The Draft Mode (Draft Mode) - GRAPHTEC FCX4000 SERIES User Manual

Setting the draft mode (DRAFT MODE)
Set whether to use the draft mode. When the draft mode is enabled, the "D" is displayed in the READY screen
and the screen during operation.
CAUTION
When setting to ENABLED, the cutting operation is faster, but the cutting quality is not guaranteed.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed
2
Press the POSITION [ ] key (ADV.).
ADVANCE screen (1/3) is displayed.
3
Press the POSITION ( ) key.
ADVANCE screen (3/3) is displayed.
4
Press the [4] key (DRAFT MODE).
DRAFT MODE setting screen is displayed.
5
Press the [1] key (ENABLED), or the [2] key (DISABLED).
10-11