3
Press the POSITION ( ) key twice.
ARMS SETTING screen (3/5) is displayed.
4
Press the [1] key (MARK DISTANCE).
MARK DISTANCE setting screen is displayed.
5
Press the [1] key (X).
X AXIS setting screen is displayed.
6
Press the [ESC] key and increase or decrease the setting
value.
7
Confirm the setting and press the [ESC] key (PREVIOUS).
MARK DISTANCE is selected and it will return to MARK DISTANCE
screen.
8
Press the [2] key (Y).
Y AXIS setting screen is displayed.
9
Press the POSITION (
the setting value
) keys and increase or decrease
5-19
Supplement
It will return to ARMS SETTING screen (3/5)
without changing the settings when you
press the [ESC] key (CANCEL).
Supplement
•
Digits of settings can be changed by
pressing the [SLOW] key.
•
Setting range is 0.0 mm up to the upper
limit of the cutting area.
Supplement
•
Digits of settings can be changed by
pressing the [SLOW] key.
•
Setting range is 0.0 mm up to the upper
limit of the cutting area.