Pause And Resume Cutting; Stop Cutting - GRAPHTEC FCX4000 SERIES User Manual

3.5

Stop Cutting

It will stop cutting when the [PAUSE/MENU] key is pressed while cutting. Operation selection menu is displayed on
the screen of the control panel while it is stopped. It is possible to choose either to continue or stop the operation.
It is also possible to exchange or reset the media while it is stopped.

Pause and Resume Cutting

Operation
1
Press the [PAUSE/MENU] key.
Cutting will stop and following screen is displayed.
2
Perform necessary operation, such as exchanging the
media.
3
Press the [1] key (CONTINUE JOB).
Cutting will start and the screen will resume to operation.
3-12