Replacing The Cutter Plunger - GRAPHTEC FCX4000 SERIES User Manual

13.4

Replacing the Cutter Plunger

The tip of the cutter plunger gets worn down due to friction with the media.
When the tip of the cutter plunger gets worn down, cut quality suffers.
When the tip of the plunger cap gets worn down, it is recommended that you replace it with the new cutter plunger.
PHP33-CB09N-HS/ PHP35-CB09-HS/
PHP33-CB15N-HS PHP35-CB15-HS
Plunger Plunger
Tip Tip
CAUTION
To avoid bodily injury, handle cutter blades with care.
13-6