Selecting Tool Condition; Lcd Display; Selecting The Tool Condition Number - GRAPHTEC FCX4000 SERIES User Manual

2.7

Selecting Tool Condition

Set the "TOOL CONDITION (Cut Condition) No.", "TOOL", "OFFSET", "FORCE", "SPEED", and "ACCEL
(ACCELERATION)".

LCD Display

Tool condition number that is currently being used
User number

Selecting the tool condition number

Eight settings (1 to 8) as the tool condition can be stored. By switching this setting, it can be switched to 8 types of
label material-specific settings that have been set previously.
Operation Method: Operation with the [COND/TEST] key
1
Press the [COND/TEST] key from READY status.
CONDITION screen (1/4) is displayed.
2
Press the [1] key.
CONDITION No. selection screen is displayed.
3
Press the POSITION (
Selected condition
) keys and select the setting.
2-16