GRAPHTEC FCX4000 SERIES User Manual page 151

4
Press the [1] key (Condition No.).
CONDITION No. selection screen is displayed.
5
Press the POSITION (
No.
6
Confirm the setting and press the [ESC] key (PREVIOUS).
CONDITION No. is selected and return to CUT LINE PATTERN setting
screen.
7
Press the [2] key (PERFORATION).
PERFORATION setting screen is displayed.
8
Press the POSITION (
9
Confirm the setting and press the [ESC] key (PREVIOUS).
PERFORATION will be set and it will return to CUT LINE CONDITION
screen.
10
Press the [3] key (CUT).
CUT L. setting screen is displayed.
) key and select the CONDITION
) keys and set the ON.
7-15