Setting The Assign Tool - GRAPHTEC FCX4000 SERIES User Manual

Setting the Assign Tool

This function enables you to assign Tool Holder 1 and Tool Holder 2 to Condition No. 1 to 8.
Supplement
To change the tool with application software, it is necessary to enable "Enabling/Disabling the Condition Select Command
(TOOL SELECT COMMAND)". Refer to "Enabling/Disabling the Condition Select Command (TOOL SELECT COMMAND)"
described later.
Operation
1
Press the [COND/TEST] key in the default screen.
CONDITION screen (1/4) is displayed.
2
Press the POSITION ( ) key.
CONDITION screen (2/4) is displayed.
3
Press the [2] key (ASSIGN TOOL).
ASSIGN TOOL setting screen is displayed.
4
Press the POSITION (
number (CONDITION No.).
5
Press the [1] key (TOOL1) or [2] key (TOOL2).
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to CONDITION screen (2/4).
7
Press the [COND/TEST] key.
It will return to default screen.
) keys and select the condition
2-26