GRAPHTEC FCX4000 SERIES User Manual page 98

4
Press the [3] key (DISTANCE ADJUST).
DISTANCE ADJUST setting screen is displayed.
5
Press the [1] key (MODE).
DISTANCE ADJUST setting screen is displayed.
6
Press the [1] key (USER), the [2] key (CUSTOM), or the [3]
key (STANDARD).
Mode is selected and it will return to DISTANCE ADJUST screen.
7
The procedures are different depending on the selected mode.
When USER or STANDARD modes are selected
Skip to step 9.
When CUSTOM mode is selected
Press the [2] key (CUSTOM UNIT).
CUSTOM UNIT selection screen is displayed.
8
Press the [1] key (5mm), the [2] key (10mm), or the [3] key
(50mm).
CUSTOM UNIT is selected and it will return to DISTANCE
ADJUSTscreen.
9
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS SETTING screen (2/5).
10
Press the [PAUSE/MENU] key.
It will return to default screen.
Supplement
It will return to ARMS SETTING screen (2/5)
without changing the settings when you
press the [ESC] key (CANCEL).
Supplement
It will return to DISTANCE ADJUST setting
screen without changing the settings when
you pressthe [ESC] )key (CANCEL).
Supplement
It will return to DISTANCE ADJUST setting
screen without changing the settings when
you pressthe [ESC] key (CANCEL).
5-16